Permanent AlNiCo Magnets Aluminium, Nickel, Cobalt and Iron alloy

Short Description:

Size: Customizable

Grade: Customizable

Material: Isotropic or Anisotropic

Shape: Round / Cylinder / Block / Ring / Arc

Density: 6.9-7.3g/cm³


Product Detail

Product Tags

Product Description

AlNiCo-magnet-4

AlNiCo Magnet (Aluminium, Nickel, Cobalt, and Iron alloy) is obtained by casting process, shaped in cheap phenolic resin sand molds. It can operate in environments up to 500 °C with very good resistance against corrosion, therefore coatings are seldom required.
The typical final shapes such as blocks, cylinders, rings, and arcs are obtained by cutting and grinding processes of pressed standard blocks or unitary compression pre-molded parts. Extremely fine tolerances can be obtained although, because of its high brittleness, it has to be handled and assembled with care to avoid chips and cracks.
AlNiCo magnets play an essential role in many industrial and consumer products. You can find AlNiCo magnets in electric motors, electric guitar pickups, microphones, sensors, speakers, traveling wave tubes, cow magnets, etc.

Item

Grade

Remanence induction

Coercive force

Intrinsic Coercive force

Maximum Energy product

Working Temp

Density

Remark

Br

Hcb

Hcj

(BH)max

Tw

ρ

T

KGs

kA/m

KOe

KA/m

KOe

KJ/m3

MGOe

°C

g/cm3

Sintered AINiCo

AlNiCol0/5

0.60-0.63

6.0-6.3

48-52

0.60-0.65

52-56

0.65-0.7

8-10

1.00-1.25

≤450

6.8

Isotropic

AlNiCol2/5

0.70-0.75

7.0-7.5

48-56

0.60-0.70

52-58

0.65-0.73

11-13

1.4-1.6

≤450

7.0

AlNiCol4/8

0.55-0.60

5.5-6.0

75-91

0.95-1.15

80-95

1.0-1.2

14-16

1.75-2.0

≤550

7.0

AlNiCo20/10

0.60-0.64

6.0-6.4

93-110

1.16-1.38

100-118

1.25-1.4

18.0-22.4

2.25-2.8

≤550

7.0

AlNiCo28/6

1.0-1.12

10.0-11.2

56-64

0.7-0.8

58-66

0.73-0.83

28-32

3.5-4.0

≤550

7.2

Anisotropic

AlNiCo34/5

1.15-1.23

11.5-12.3

48-56

0.60-0.70

49-57

0.62-0.72

32-36

4.0-4.5

≤550

7.2

AlNiCo37/5

1.19-1.27

11.9-12.7

48-56

0.60-0.70

49-57

0.62-0.72

36-38

444.8

≤550

7.2

AlNiCo40/5

1.22-1.26

12.2-12.6

50-56

0.62-0.7

51-57

0.64-0.72

38-40

4.8-5.0

≤550

7.2

AlNiCo40/10

0.95-1.0

9.5-10.0

100-110

1.25-1.38

104-114

1.3-1.43

40-44

5.0-5.5

≤550

7.1

AlNiCo38/11

0.80-0.85

8.0-8.5

111-121

1.40-1.52

114-125

14.3-15.7

38-40

4.8-5.0

≤550

7.1

AlNiCo36/15

0.70-0.75

7.0-7.5

140-160

1.75-2.0

154-174

1.93-2.18

36-45

4.5-5.6

≤550

7.0

AlNiCo40/16

0.7-0.75

7.0-7.5

160-175

2.0-2.2

174-189

2.18-2.37

40-44

5.0-5.5

≤550

7.0

AlNiCo40/12

0.83-0.90

8.3-9.0

120-132

1.50-1.65

124-136

1.57-1.71

40-44

5.0-5.5

≤550

7.1

AlNiCo45/13

0.89-0.91

8.9-9.1

120-132

1.50-1.65

126-138

1.58-1.73

44-50

5.5-6.2

≤550

7.1


  • Previous:
  • Next:

  • Write your message here and send it to us